Reclaimed Gray Quart

In stock (106 items available)
Score: 5.00 (votes: 2)
Reviews: 2
2

PRODUCT DESCRIPTION

Commercial Concentrate
Makes 1-3 US Gallons 

Reclaimed Gray is a reactive stain works with tannins found in the wood to imitate the natural aging process, creating an aged, gray look. The character and color that comes by using Reclaimed Gray is nearly impossible to achieve with oil and water based stains or dyes. Reclaimed Gray can bring a great finished product or it can be used to give gray to black undertones to regular solvent base stains. Formulated to work with woods with high levels of tannin (Oak, Walnut and others) and should not be used on low tannin wood.

  • Gives popular "Grayed" look
  • Environmentally Friendly
  • Low VOC's
  • Comes as concentrate, meant to be diluted

 

  • $25.00
Old price: $150.00 , you save $125.00
  • 83% off
Qty:  
  • Weight
    2.5 lbs
  • SKU
    OWS-R-02
  • UPC/ISBN
    860051002114

PRODUCT DESCRIPTION

 Reclaimed Gray stain imitates the aging process that occurs in nature by reacting with the tannin's of the wood to create an unique aged gray look. Use as the color for the finished product or to give a gray to black undertone to your regular solvent base stains.

DIRECTIONS:
 
Surface Preparation:
 
1. Properly prepare surface by removing all oils, dirt and old finish.
 
2.Use 100-120 grit paper for the final sanding cut.
 3.Remove all dust with a vacuum.
 
4.Take a moisture reading and make note for future reference.  

Application:
 
When first learning to use Reclaimed Gray it is best to start with a mixture of 8-10 parts of water to one part Reclaimed Gray
 1.Stir or shake material thoroughly before and occasionally during use. Apply a test sample on a small inconspicuous area before proceeding with entire job. Reclaimed Gray can be lightened using tap water (do your test sections and project with the same water) but is best to use reverse osmosis, de-ionized, or distilled water. Mixed stain has a shorter shelf life, mix only what you need for each job.
Warning! water can cause irreversible damage veneers and engineered products.
 
2.Apply the coat of Reclaimed Gray liberally with a pump sprayer, (be careful of drips and laps)smoothing it out with a brush, roller, painters pad or T bar applicator. Going with the grain as much as possible. Going back over the sections every few feet to spread out any lapping or puddling.
 
3.Allow product to penetrate for 5- 10 minutes, then when stain is mostly dry you can start rinsing with tap water. Rinsing to soon can affect the chemical reaction
 4.If darker color is desired, you can apply a second coat, or re-wet after thoroughly dry. Rinsing only after the final coat.
 
5.Allow the final coat to thoroughly dry.
 
Take moisture reading and check that it matches original reading, before putting on the finish or stain. 
 
6.Finish with a urethane or oil finish of your choice. For best results coat with a solvent based finish or hard wax oil.
Caution some waterborne finish will leave a purple hue in the finish

DRYING TIMEApproximately 1 hours to overnight. NOTE: Drying time will be increased by high humidity, low temperature, lack of air movement or incomplete removal of excess water.

CLEANUPClean equipment using soap and water. WARNING! Reclaimed Gray can and will permanently stain things, use the same care as a solvent base stain.

COVERAGEApproximately 400-800 sq.ft./ gallon depending on wood type and porosity

SOLVENT: Water

KEEP OUT OF REACH OF CHILDREN.
 
FIRST AID: If swallowed, do NOT induce vomiting. CALL PHYSICIAN IMMEDIATELY. For skin contact, wash thoroughly with soap and water. If irritation persists, get medical attention. If affected by inhalation, remove to fresh air and CALL PHYSICIAN. In case of eye contact, immediately flush eyes thoroughly with water, then remove any contact lenses. Continue to flush eyes with water for at least 15 minutes. If irritation persists, CONTACT A PHYSICIAN.

MSDS  oldworldstains.com/msds

Old World Stains-American Fork, Utah


Customer reviews
Average rating:
5.00 (Votes: 2)
Rating of votes (2)
5
 
2customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
Please sign in to add review
  • K. Jones
    Mar 26, 2019, 08:01
    It doesn't have the strong smell that other stains have. I also use it for my craft projects.
  • George's Finishing
    Feb 25, 2019, 11:03
    As easy as water popping the grain, and 30 minutes later, I am finishing the floor

Related products

Drop items here to shop
Product has been added to your cart

Customers who viewed this product bought